Go to startpage
  • Asia
  • Europe
  • North America

Consulting & guidance

We work as consultants in the nonwoven and absorbent hygiene industries supporting existing companies as well as start-ups. Employ us to assist you with objective valuations, line & set-up guidance, brokering & sales and more. What can we do for you?

Nonwoven and absorbent hygiene equipment

We have a history as one of the oldest and most well-established brokering companies in nonwoven and absorbent hygiene equipment. See our available equipment »

Nonwoven

  600 - 609Fiber Preparation
  610 - 619Web-forming
  620 - 624Binder Application
  625 - 625Fiber Preparation
  629 - 629Binder Application
  630 - 639Thermal Bonding
  640 - 648Mechanical Bonding
  650 - 659Slitting, Cutting, Winding and Take-up
  660 - 669Treatment of Nonwoven Fabric
  670 - 679Recycling
  680 - 689Other Nonwoven Equipment
  690 - 699Complete Nonwoven Lines

Fiber Preparation
600. carding willows

Code: 600-0001     1 x Dilo carding willow
Add this item to your list of interesting machines Type: SR 12     Width: 1000 mm     YOC: 1960     EL: 220/3/50
single cylinder with 4 meter feed table for recycling of material. Motor app 25 kW.
Infeed with compressing rollers and mounted on vibration rubber pads. Good condition

 

Code: 600-0003     1 x Rolando carding willow
Add this item to your list of interesting machinesWidth: 1200 mm     YOC: 1978     EL: 380/3/50
opening set consisting of Rolando RT3 bale-opener and RV 1 carding willow.

601. bale openers

Code: 601-0003     1 x Masias bale opener
Add this item to your list of interesting machines Type: ABRI-CAR     Width: 1500 mm     YOC: 1988     EL: 380/3/50

604. mixer/material bins

Code: 604-0004     1 x Trützschler mixer/material bin
Add this item to your list of interesting machines Type: MPM10/1400     Width: 1400 mm     YOC: 1989/1999     EL: 575/3/60
10-chamber mixer, completely overhauled in 1999, production max capacity 1000 kg/hr.

 

Code: 604-0005     1 x Hergeth Hollingsworth mixer/material bin
Add this item to your list of interesting machines Type: SML 6     Width: 1600 mm     YOC: 1995     EL: 380/3/50

608. other fiber prep. equip.

Code: 608-0001     1 x Trützschler other fiber prep. equip.
Add this item to your list of interesting machines Type: PWSE     Width: 1400 mm     YOC: 1995     EL: 380/3/50
03 x electroncic weighing feeders. Capacity 250/350 kg/hr.

609. complete fiber opening lines

Code: 609-0009     1 x Crompton & Knowles complete fiber opening line
Add this item to your list of interesting machinesWidth: 915 mm     YOC: 1976     EL: 400/3/60
consisting of:
05 x 360 BFS baleopeners, ww: 915 mm and 1800 mm long infeed aprons, weigh pans with load cells
complete with take-up conveyor, fiber transport fan, magnet trap and control panel.

 

Code: 609-0014     1 x Trützschler complete fiber opening line
Add this item to your list of interesting machinesWidth: 1600 mm     YOC: 1999     EL: 380/3/50
final stage of fine opening and mixing, consisting of:
01 x MPM 1600, 10 chambers, complete with LVSA condensors, MRE multi mixer for recycled material with TV 425 fan.
02 x BEC 1600 fine openers with 1 x LVSA condensors each with fan and separate drives for fan and perforated drum
01 x MS 1400 material silo with 2 LVSA condensors with fan and separate drives for fan and perforated drum

 

Code: 609-0015     1 x MTV complete fiber opening line
Add this item to your list of interesting machines Type: CA1500     Width: 1500 mm     YOC: 1989     EL: 380/3/50
3 bale-openers with take-up conveyor and fan.

 

Code: 609-0016     1 x Hergeth Hollingsworth complete fiber opening line
Add this item to your list of interesting machinesWidth: 1600 mm     YOC: 1995     EL: 380/3/50
final stage of fine opening and mixing, consisting of:
01 x SML 6 mixer, ww: 1600 mm
01 x MTO-S, ww: 1250 mm

 

Code: 609-0017     1 x Trützschler complete fiber opening line
Add this item to your list of interesting machinesWidth: 1600 mm     YOC: 2001     EL: 380/3/50
consisting of:
02 x BX+E+W weighing bale openers
01 x FM 170 tuft mixer
complete with electrical panel.

 

Code: 609-0018     1 x Trützschler complete fiber opening line
Add this item to your list of interesting machinesWidth: 1400 mm     YOC: 1987-1995     EL: 380/3/50
consisting of:
- 01 Trützschler BDT Blendomat, double sides, 16 meter rail
- 01 Cormatex bale-opener, ww: 2500 mm, length 10 meters
- 02 x Trützschler LVSA + bale-opener
- 01 x collecting belt
- 01 x Trützschler CS 1000 fine-opener, yoc: 1987
- 01 Trützschler MPM4/1400 mixer, yoc: 1991
- 01 x Trützschler MS 1400, yoc: 1988
- 02 x Trützschler LVSA + PWSE
- 01 x collecting belt
- 01 x Trützschler FMN
- 01 Trützschler MPM6/1400 mixer, yoc: 1995

 

Code: 609-0019     1 x Trützschler complete fiber opening line
Add this item to your list of interesting machines Type: RU3-2900     Width: 1500 mm     EL: 380/3/50
Consisting of:
03 x Trützschler bale opener with mechanical weigh pans
- Feeding conveyor belt: 2500 mm
- Vertical spiked lattice on cylinder dia. 295 mm
- Horizontal spiked lattice on charge side
- Rotating brush on the discharge side
- Transversal collection conveyor with pressing cylinder, width- 1000 mm abt., lenght - 7000 mm abt.
01 x Trützschler blending opener
- Working width : 1000 mm
- Drum diameter : 1000 mm
- Spiked cylinders
Capacity 500 - 700 kg/hr depending on fibres.
The line has been completly reconditioned in year of 2005

625. Coating

Code: 625-0001     1 x Nordson Coating
Add this item to your list of interesting machines Type: PorousCoat     Width: 2500 mm     YOC: 2004     EL: 380/3/50
for random coating of hot melt adhesive, production of breathable materials, open-weave goods and other substrates. Speed 70 m/min.
Including: 2 x BM 200 bulk melters,1 x MX 44110 melt-tank, 1 x GP 200 pump station with 12 pumps and PC BC62-12/2490 coating applicator with 24 heads.
The BC 62 Porous Coat system delivers breathable coating at extremely low application weight tolerances. Coating weights from 0.6 gsm to 50 gsm can be easily achieved by changing the pump speed. By shutting off individual control modules, adjustments in application width can be made without effecting coating weight.

Web-forming
610. card feeds

Code: 610-0103     1 x IKS card feed
Add this item to your list of interesting machines Type: Vibrachute     Width: 2500 mm     YOC: 2008     EL: 380/3/50
Brand new - never used. Complete with drives and feeding device.

 

Code: 610-0107     1 x Erko Trützschler card feed
Add this item to your list of interesting machines Type: EDS-W     Width: 3500 mm     YOC: 2011     EL: 380/3/50
pressurized chute-feed, similar to the Hergeth MC-W Masterchute, including also;
- 02 x TV300 and TV300/F fans - model 6.190 - air capacity max 6000 m3/hr, with profile windows
- 01 x Hergeth Hollingsworth FS/5 feedbox - model 6.220, completely reconditioned in 2011 with opening roll, needle row beater with aspiration channel, feeding by blow-in hood, adaption also provided for overpressure hood.

 

Code: 610-0108     1 x Thibeau card feed
Add this item to your list of interesting machines Type: CFX II     Width: 2300 mm     YOC: 2002/2007     EL: 380/3/50
Original volumetric feeder modified to electronic in 2007, composed as follows:
Tray with integrated filling shaft, equipped with 2 photocells, conveyor belt and spiked lattice, drive wiping cylinder, balancing roller, vertical filling hopper, magnet trap, all complete with separate electrical panel.

611. conventional nonwoven cards

Code: 611-0026     1 x HDB conventional nonwoven card
Add this item to your list of interesting machines Type: Galaxy     Width: 3000 mm     YOC: 1991     EL: 380/3/50
composed as follows:
- breast - dia 500 mm with 1 worker/stripper
- main swift - dia 1270 mm with 5 workers/strippers
- doffer - dia 1000 mm, take-off by comb
complete with BTT 4 vibra-feed and silo.

 

Code: 611-0027     1 x HDB conventional nonwoven card
Add this item to your list of interesting machines Type: Galaxy     Width: 3000 mm     YOC: 1991     EL: 380/3/50
composed as follows:
- breast - dia 500 mm with 1 worker/stripper
- 1st main swift - dia 1270 mm with 5 workers/strippers
- transfer doffer - dia 1000 mm
- 2nd inlet breast
- 2nd main swift - dia 1270 mm with 5 workers/strippers
- doffer - dia 1270 mm

 

Code: 611-0029     1 x Bonino conventional nonwoven card
Add this item to your list of interesting machinesWidth: 3500 mm     EL: 380/3/50
breast section, main swift with 4 workers/strippers, double doffer, today running 50 m/min and 900 kg/hr (with recycled fiber)
Renovated in 2006.

 

Code: 611-0031     1 x F.O.R. conventional nonwoven card
Add this item to your list of interesting machines Type: Injection     Width: 2500 mm     YOC: 1995     EL: 380/3/50
double doffer with randomizing rollers, with FBK 536 chutefeed

 

Code: 611-0034     1 x Tatham conventional nonwoven card
Add this item to your list of interesting machines Type: laboratory card     Width: 1000 mm     YOC: 1974     EL: 380/3/50
complete chutefeed feeding the breast-section, dia 320 mm with 2 workers/strippers, dia 81/66 mm, main cylinder dia 1400 mm with 6 workers/strippers – dia 122/90 mm, doffer dia 540 mm with Hollingsworth Doffmaster take off.
The unit is well maintained and has new bearings, new adjustable pedestals on the strippers. The unit has its own electrical cabinet and with one frequency converter for start up.

614. crosslappers

Code: 614-0022     1 x Automatex crosslapper
Add this item to your list of interesting machines Type: FA 5000 T/C     Ingoing width: 3000 mm     Outgoing width: 7000 mm     YOC: 2007     EL: 380/3/50
Originally constructed as FA6000/TC model but re-modified by Automatex in 2011 to FA5000/TC. Speed 120 m/min.

 

Code: 614-0024     1 x HDB crosslapper
Add this item to your list of interesting machinesIngoing width: 3000 mm     Outgoing width: 3000 mm     YOC: 1986     EL: 380/3/50
speed, 50 m/min.

 

Code: 614-0025     1 x Asselin crosslapper
Add this item to your list of interesting machines Type: Profile 600 030     Ingoing width: 3000 mm     Outgoing width: 6500 mm     YOC: 1995     EL: 380/3/50
speed: 110 m/min.

 

Code: 614-0026     1 x Asselin crosslapper
Add this item to your list of interesting machines Type: Elite     Ingoing width: 2900 mm     Outgoing width: 3000 mm     YOC: 1993     EL: 380/3/50
Speed 75 m/min, retrofitted in 2009 with NT transmission, aviators and new motors.

Binder Application
620. padders

Code: 620-0001     1 x Küsters padder
Add this item to your list of interesting machines Type: 222.60-3800     Width: 3800 mm     YOC: 1992     EL: 380/3/50
2-cylinder impregnation padder, Küsters S-roll dia 365 mm with Ebonite 100 degree Shore/hardness sleeve and main drive cylinder dia 460 mm with Blue Roll 83 degree Shore/hardness sleeve, complete with control panel. Max pressure 100 N/mm (420 KN), max speed 120 m/min, 30 kW.

 

Code: 620-0002     1 x Küsters padder
Add this item to your list of interesting machines Type: 222.54-4000     Width: 4000 mm     YOC: 1995     EL: 380/3/50
2-cylinder impregnation padder, Küsters S-roll dia 320 mm with Blue Roll 83 degree Shore/hardness sleeve and main drive cylinder dia 470 mm with Ebonite 100 degree Shore/hardness sleeve, complete with control panel. Max pressure 50 N/mm, max speed 120 m/min, 18.5 kW.

 

Code: 620-0005     1 x Beta padder
Add this item to your list of interesting machines Type: FMC-3     Width: 3600 mm     YOC: 2000     EL: 380/3/50
2 rubber cylinders, 1 steel cylinder

 

Code: 620-0006     1 x Beta padder
Add this item to your list of interesting machines Type: D-FLC-3     Width: 2600 mm     YOC: 1995     EL: 380/3/50
Differentiated padder = two machines in one, so each nip can work at any working pressure, independently from the other nip.
Cylinder width 2600 mm - working width maximum 2500 mm
Working pressure = 12 ton max (for each nip)
3 cylinders - dia 270 mm, idle upper roll, central driven roll, lower idle roll
Machine max speed = 70 m/min
Double lifting trough
Entry device with two stainless steel rollers to adjust fabric tension
Synchronization by dancing roller
Front spreader roller in Ebonite (driven by 0.5hp motor)
Rear spreader roller in Stainless steel (fixed)

629. complete application lines

Code: 629-0007     1 x Consultex complete application line
Add this item to your list of interesting machines Type: IQ 141     Width: 2400 mm     YOC: 2010     EL: 440/3/60
Rotor spraying coating system suitable for carpet backing, flame retardant application, odor application in nonwovens and resin coating. With MENZEL IR 6 zones heaters.
Max Spray rate per rotor carrier: 3300 ml/meter/minute
Compressed Air: 5 bar =73 psi
consisting of:
01 x Rotor carrier
01 x 60 liter supply tank
01 x Integrated control station for regulation of spray amount in gsm units.
01 x Mounting Frame and Dryer for applicator
- Operating Speed: up to 25 meters/min.
- Product: Nonwoven 300 gsm - 700 gsm

 

Code: 629-0008     1 x ESCH complete application line
Add this item to your list of interesting machines Type: F02-A-1800     Width: 2600 mm     YOC: 2002     EL: 440/60
Complete Textile Flocking module, used for the continous application of flock material to a textile web. Wiith adhesive applicator, flocking line, dryer and cooling unit.
Dimensions: Length:3850mm, Height, 3800mm, Weight: 1200kg
Flock dosing Width: 1800mm
Speed of dosing brushes: 0-10 rpm

 

Code: 629-0009     1 x Tomes complete application line
Add this item to your list of interesting machinesWidth: 3500 mm     YOC: 2000     EL: 380/3/50
Complete foam impregnation plant for value added Nonwoven products with light material ranging from 40 and up. Speed appr. 10 met/min consisting of:
-01 Tomes 2-cylinder impregnation padder, double foam distributor, cylinder dia 445 mm nickle coated.
-01 Tomes cylinder dryer - 7 vertically stacked cylinders (by Wumag) - cylinder dia 800 mm, steam-heated
-01 Tomes curing chamber (polymerisation), capacity 27 meters, complete with heating chamber and fan.
-01 Tomes accumulator, capacity 28 meters
-01 Tomes longitudinal slitter with 4 pressure knives, complete with dancing cylinder for automatic speed regulation
-01 Tomes winder, 2 cylinders and pressure cylinder.
Complete with control cabinet and integral conveyor belts.
Samples can be mailed upon request.

 

Code: 629-0011     1 x Monforts complete application line
Add this item to your list of interesting machines Type: coating and drying line     Width: 3000 mm     YOC: 1995     EL: 440/3/60
Complete high-speed saturation and coating line, for coating of all types of woven and nonwoven fabrics with antimicrobial, flame retardants, alcohol and water repellants, hydrophobic application, electrometric coatings, powder bonding, printable and surface drying, hot-melt sealing. Line consisting of:
- 01 x dual unwinder with continuous seamer
- 01 x J-box accumulator
- 01 x stainless steel dip tank with multiple rolls for maximum saturation
- 01 x padder with 2 squeeze rolls
- 05 x stacks of high pressure Teflon coated steam cans with 8 cans per stack (total 40 cans), with edge guiding system and width control between the stacks.
- 01 x Monforts Thermex A-A-B gas-heated hot air oven, three zones, approximately 160 m capacity.
- 01 x stack with 4 stainless steel cooling cylinders
- 01 x vertical accumulator
- 01 x automatic slitter/winder with sheer slitting, cross cutting and score slitting.
Complete with several Earhardt & Leimer edge guides, hoists, roll wrapping, electrical drives and tension controls.
Complete with 150 HP gas fired steam boiler.

 

Code: 629-0013     1 x Santex complete application line
Add this item to your list of interesting machinesWidth: 1500 mm     YOC: 1998     EL: 380/3/50
complete line for power lamination consisting of:
1 double unwinder, 1 powder dispensing unit, 1 infrared belt drier, lamination calender, cooling belt drier, slitting & winding unit.

Thermal Bonding
630. ovens/stenters

Code: 630-0004     1 x Charvo oven/stenter
Add this item to your list of interesting machinesWidth: 4500 mm     YOC: 1999     EL: 380/3/50
Double pass oven with 2 gas burners and 2 spray boxes, gas heated, speed max 30 m/min, 15 meters long.
Working width 4200 mm. 3-layer metallic belt.
For spray bonded wadding products as well as thermobonded wadding with bico fibers.

 

Code: 630-0005     1 x Schott & Meissner oven/stenter
Add this item to your list of interesting machines Type: TopCon HP     Width: 5000 mm     YOC: 2009     EL: 380/3/50
double belt oven with cooling calender. 5000 mm working width for production of nonwovens. 100% BiCo or mixes with PP and PE in the range of 70-400 gsm, max capacity 700 kgs/hr at a max speed of 70 m/min. Consisting of:
TopCon HP Double Belt Oven - Air-impingement treatment
- 1-pass double side air impingement oven
- 4 x 2 m TopCon HP heating sections = 8 meters active oven length
- 4 x direct heating system by gas blow burner, 300 kW
- 4 x circulating air fan, 37.000 m3/hr, 30 kW
- 1 x exhaust air fan, 1 x 8.000 m3/hr, 4 kW
- TopCon HP double belt conveying system including belt tracking mechanism
Calibrating and smoothing calender - cooled execution
- calender casing
- 2 x single jacket rolls - dia 500 mm, separately driven
- upper rollers siliconized
- 2 x pneumatic cylinders for pressure load
- electromotive gap setting by precision worm gear jack
- rotary joints, flexible connection tubes and fittings
- cooling unit - approximately 54 kW
Complete with control panel and operator panel and multi-motor AC drives
All in excellent condition - very little used.

 

Code: 630-0007     1 x Monforts oven/stenter
Add this item to your list of interesting machines Type: Dynair     Width: 2500 mm     YOC: 2006     EL: 380/3/50
consisting of:
- 01 double-belt dryer, 6 chambers - gas heated
- 01 air cooling on separate belt

 

Code: 630-0008     1 x Amdes oven/stenter
Add this item to your list of interesting machines Type: Steam dryer     Width: 3600 mm     YOC: 1994     EL: 380/3/50
- 3 heating zones (levels)
- After first level materia is rotated. It allows to spray coating on both sides of material.
- dimensions: length about 11m , width 4,5m
- teflon belts on each level
- saturated steam supply 15Mpa, t=200 deg. C.
- reaching the temperature to 190 deg C,
- length of the tunnel 3x10m
- 2 exhaust fans in each heating zone
Can also be offered with accumulator and winder if of interest.

634. calenders

Code: 634-0030     1 x Küsters calender
Add this item to your list of interesting machines Type: 422.34/2500     Width: 2500 mm     YOC: 2006     EL: 380/3/50
2 roller electro/steamheated calander with bottom roller steel and top S-roller embossed (both rollers dia 380 mm), total effect appr. 80 kW for products of 210 - 270 grams/sqm, pressure 900 kN.

 

Code: 634-0031     1 x Küsters calender
Add this item to your list of interesting machines Type: 412.50     Width: 3300 mm     YOC: 2004     EL: 440/3/60
for thermobonding of drylaid carded or spunbond polyester (or other materials), two cylinders, one HOT-S roll 250, top roll - steel engraved. Capacity 660 kgs/hr, speed upto 110 m/min, line force max 110 n/mm, total force 525 kn (52 tons), hot-oil heated. Including also Aura heating unit.

 

Code: 634-0038     1 x Küsters calender
Add this item to your list of interesting machines Type: 413.60     Width: 4900 mm     YOC: 1995     EL: 380/3/50
3 cylinders, HOT-S 250, upper and lower cylinder engraved, engraving pattern 4800 mm, linear pressure 140 N/mm, speed range 8 - 160 m/min, with cooling cylinders, including HTT electrical boiler with pumps and secondary circuit.
Calendern designed to work wtih PP, PES and Bico fibers, 15 - 150 gsm. Max production 1600 kg/hr.
Maximum fabric width at inlet 4560 mm.

 

Code: 634-0041     1 x Bombi calender
Add this item to your list of interesting machines Type: CAL 3C/35     Width: 3500 mm     YOC: 2002     EL: 380/3/50
3-cylinder calender - all stainless steel - dia 550 mm, with 7 slitting knives at the exit, including CEIA type TE metal detector, with 7 slitting knives at the exit. Max temp: 220 deg. C, minimum gap between cylinders 0.2 mm - maximum gap 7 cm - pneumatically adjustable.

 

Code: 634-0042     1 x Olbrich calender
Add this item to your list of interesting machinesWidth: 2600 mm     YOC: 1994     EL: 380/3/50
horizontal 2-roll thermobonding, smoothing and embossing calender.
Max fabric width 2400 mm, max hydraulic pressure 20 tons, heated embossing roll - 450 mm dia, max speed 300 m/min.
Electrical cabinet, manouver panel, drive unit, counter pressure cylinder, embossing cylinder. Heating capacity max 200 kW.
1 embossed spare roll and 1 rubber spare roll.

 

Code: 634-0043     1 x Soc-Mec calender
Add this item to your list of interesting machinesWidth: 2500 mm     YOC: 2000     EL: 380/3/50
two cylinders - dia 500 mm, max temp 200 deg. C., both SS and oil-heated, including thermal oil boiler.

 

Code: 634-0044     1 x Ramisch Kleinewefers calender
Add this item to your list of interesting machinesWidth: 2500 mm     YOC: 1988     EL: 380/3/50
2 cylinders, oil and electric heat, max speed 100 m/min. Upper roll smooth (SS) - dia 460 mm, bottom roll either smooth, engraved NW5 or NW22. Pressure of working roll is 150 bar (153 kg per square cm), including oil-heating station - temperature up to 300 deg. C., electrical heating. 2 cooling rolls, complete with Bastian accumulator and winder.

 

Code: 634-0046     1 x Küsters calender
Add this item to your list of interesting machines Type: 412.40     Width: 2100 mm     YOC: 1990     EL: 380/3/50
2-cylinder nonwoven calender, oil heated, pressure 150N/mm, speed up to 100 m/min. Max temp 170 deg. C.
Engraved cylinder dia 415 mm - plain cylinder dia 329 mm. 2 cooling cylinders. Complete with oil boiler.

 

Code: 634-0047     1 x Küsters calender
Add this item to your list of interesting machines Type: 413.40     Width: 2500 mm     YOC: 1996     EL: 380/3/60
oil heated, two cylinder thermobond calender for PES and PP. Surface width 2700 mm - fabric width 2500 mm, top cylinder engraved - bottom cylinder HOT-S 250, max temperature 250 deg. C., total pressure 300 kN - line pressure 110 N/mm.
Including HTT oil burner.

 

Code: 634-0048     1 x Ramisch Kleinewefers calender
Add this item to your list of interesting machinesWidth: 1400 mm     YOC: 1994     EL: 380/3/50
oil-heated, including burner, two cylinders.
Was used to run PP, 30-40 gsm for face mask

 

Code: 634-0049     1 x Ramisch Kleinewefers calender
Add this item to your list of interesting machinesWidth: 1800 mm     YOC: 1993     EL: 380/3/50
2-cylinders - dia 450 mm, thermo oil heated + electric, newly chrome plated cylinders. Roller width 2000 mm - working width 1800 mm.

Mechanical Bonding
640. pre-needle looms

Code: 640-0107     1 x Asselin pre-needle loom
Add this item to your list of interesting machines Type: DF 1500     Width: 5500 mm     YOC: 1985     EL: 380/3/50
rotary type, hub 70 mm, max stroke frequency 750

 

Code: 640-0112     1 x Fehrer pre-needle loom
Add this item to your list of interesting machines Type: NL 9/S     Width: 8200 mm     YOC: 1995     EL: 380/3/50
including FFS in-feed with transport and compression apron in combination with special inlet rollers with plastic fingers.
Speed 1250 strokes/min, 3000 needles per linear meter, penetration 60 mm, speed 1-10 m/min.

 

Code: 640-0116     1 x Automatex pre-needle loom
Add this item to your list of interesting machines Type: PR-50/T     Width: 4200 mm     YOC: 1997     EL: 380/3/50
single board, downstroke, 5000 needles/lm, 55 mm stroke, 1200 strokes/min, complete with EN. 81/A free standing infeed system device.

 

Code: 640-0118     1 x Asselin pre-needle loom
Add this item to your list of interesting machines Type: SD.65.1M     Width: 6500 mm     YOC: 1993     EL: 380/3/50
single board, downstroke, with DCIN in-feed, 5666 needles/lm.

 

Code: 640-0119     1 x Fehrer pre-needle loom
Add this item to your list of interesting machines Type: NL 28     Width: 2500 mm     YOC: 1971     EL: 380/3/50
with CBF, single board, downstroke, 60 mm hub, 650 strokes/min, 1000 needles/lm

 

Code: 640-0120     1 x Dilo pre-needle loom
Add this item to your list of interesting machines Type: SD 25     Width: 2500 mm     YOC: 1972     EL: 380/3/50
single board, downstroke, 800 strokes/min, 2000 needles/lm

 

Code: 640-0122     1 x Automatex pre-needle loom
Add this item to your list of interesting machines Type: PR 50/T     Width: 4000 mm     YOC: 1989     EL: 380/3/50
60 mm stroke, 1300 strokes/minute, 5000 needles/lm, with infeed pressing rollers.

641. finishing needle looms

Code: 641-0124     1 x Dilo finishing needle loom
Add this item to your list of interesting machines Type: OD-OR 40     Width: 4000 mm     YOC: 1987     EL: 380/3/50
For manufacturing of endless nonwoven felt with possibilities for addition of other carriers before needling, consisting of:
01 x un-wind station for additional carrier material including overhead cranes for handling conveyors and rolls
01 x Dilo OD-OR40 needleloom from 1987, needle throw beam 80 mm, advance range 0-62 mm, stroke speed 600 rpm, exit in
02 x pneumatic pressing devices independently adjustable to guide the material, variable for following production settings:
Exit take-off station one, 300-500mm diameter
Exit take-off station two, 500 mm and up with a max laying area of 15 meter

 

Code: 641-0125     1 x Asselin finishing needle loom
Add this item to your list of interesting machines Type: 4E.16.DF     Width: 5350 mm     YOC: 1991     EL: 380/3/50
originally 4 boards - up and down, but working only as a 2 board upstroke loom, because the 2 x down modules have been taken out. Max stroke 1335 per minute, stroke 60 mm, 4 x 4200 needles/linear meter.

 

Code: 641-0126     1 x Dilo finishing needle loom
Add this item to your list of interesting machines Type: OD II 25     Width: 2500 mm     YOC: 1982     EL: 380/3/50
double board, downstroke, 30 mm hub, 1200 strokes/min, 6000 needles/lm

 

Code: 641-0127     1 x Automatex finishing needle loom
Add this item to your list of interesting machines Type: AG 50/B     Width: 4000 mm     YOC: 1989     EL: 380/3/50
upstroke, max 1300 strokes/min, 55 mm stroke height, 5000 needles/lm.

 

Code: 641-0128     1 x Asselin finishing needle loom
Add this item to your list of interesting machines Type: DF-11-4E-04     Width: 1100 mm     YOC: 1994     EL: 380/3/50
4 boards, alternate up and down stroke, 1200 strokes/min, 50 mm stroke, 4266 needles/linear meter, including DCIN in-feed device for introduction and compression of fiber batt.

 

Code: 641-0129     1 x Fehrer finishing needle loom
Add this item to your list of interesting machines Type: NL 21     Width: 5300 mm     YOC: 1978     EL: 380/3/50
double board, downstroke, 10000 needles/linear meter

 

Code: 641-0130     1 x Dilo finishing needle loom
Add this item to your list of interesting machines Type: UD II S60     Width: 6000 mm     YOC: 1993     EL: 480/3/60
4 boards - upstroke, 35 mm stroke, max 1800 strokes/min, accumulator, slitter/rewinder.
Ran 120 - 1000 gsm products.

642. structural needle looms

Code: 642-0105     1 x Dilo structural needle loom
Add this item to your list of interesting machines Type: DI-LOOP DS 45     Width: 4500 mm     YOC: 1989     EL: 380/3/50
High capacity structure loom for ribcord, velourtype needle felts and advance patterns, 40 mm stroke, 1500 strokes/min, 6000 needles/lm, gauge 3.5 mm, automatic lubrication, temperature control, module housing and lubricant discharge.
Complete with Dilo SW 45 feeding unit and un-winding unit and control panel + electronic software for patterning design.

 

Code: 642-0107     1 x Dilo structural needle loom
Add this item to your list of interesting machines Type: SV 45     Width: 4500 mm     YOC: 1973     EL: 380/3/50
400 strokes/minute, with electrical cabinet and control desk.
Missing main motor. One set of empty boards on the machine.

 

Code: 642-0108     1 x Dilo structural needle loom
Add this item to your list of interesting machines Type: OD/SV 25     Width: 2500 mm     YOC: 1985     EL: 380/3/50
400 strokes/min, one set of boards (including needles) for ribbed design.
Complete with winder and unwinder and hydraulic system for design. However - not the design control module.

 

Code: 642-0109     1 x Dilo structural needle loom
Add this item to your list of interesting machinesWidth: 2000 mm     YOC: 1975     EL: 380/3/50
400 strokes/minute, including winder but without unwinder.
Currently producing diagonal rip but has also the boards for straight needlepunch rip.
One set of boards with needles are in the machine and comes along also with one empty spare set.

 

Code: 642-0110     1 x Dilo structural needle loom
Add this item to your list of interesting machines Type: DI-LOOP VS 45     Width: 4500 mm     YOC: 1990     EL: 480/3/60
single board, downstroke, 40 mm stroke, maximum 1500 strokes/min, 6000 needles/lm, lamella 3.5 mm, with cradle unwind, accumulator and winder.

645. hydro-entangling machines

Code: 645-0001     1 x Courtaulds Research hydro-entangling machine
Add this item to your list of interesting machines Type: Pilot spunlace line     Width: 500 mm     YOC: 1985     EL: 380/3/50
3 head hydro-entanglement unit plus pre-wetting unit consisting of:
1000 liter water-holding tank, priming pump, cartridge filter unit, compressed air/water stabilizer unit, high-pressure piston pump, single-head pre-wet, 3 jet boxes, air/water separator, transport belt unit, suction-fan arrangement, a range of aperture belts and jets strips.

The pilot facility has been used to compare different compositional designs and assess processability. The hydro-entangling facility allows for the production of lengths of finished nonwoven fabric for onward assessment and gives some guidance as to the ultimate entangling performance of a specific fibre. The concepts can be made and tested for physical performance using normal testing equipment used for full-scale production.

A reasonable correlation exists between the performance of the pilot hall prepared fabrics and full-scale production lines.

Spunlace nonwoven fabrics can be prepared by taking carded webs with pre-selected fibre blends and basis weights, which are then fed into the hydro-entanglement unit. This allows the production of a finished spunlace nonwoven fabric, which will replicate a full-scale spunlace line.

Hydro-entanglement pressure can be varied up to a pressure of 150 bar to give greater or lesser degrees of hydro-entanglement, creating finished webs of different strength and bulk characteristics.

The pilot line has similar capabilities as a full-scale line in that there are a selection of available forming belts onto which the web is hydro-entangled. These replicate the types of pattern and aperture designs that can be achieved on a production line. The belts vary from a plain lacing pattern to different aperture designs and degree of openness.

647. stitch-bonding machines

Code: 647-0001     1 x Malimo stitch-bonding machine
Add this item to your list of interesting machines Type: Maliwatt     Width: 2500 mm     EL: 380/3/50
Maliwatt model 14001/25/8, gauge 7, 7 needles/inch, 2 disc knives for edges, 1 batch winder.

Slitting, Cutting, Winding and Take-up
652. take-up batching systems (thick NW)

Code: 652-0002     1 x Autefa take-up batching system (thick NW)
Add this item to your list of interesting machinesWidth: 4500 mm     YOC: 1994     EL: 380/3/50
Slitting/cutting/winding unit consisting of;
01 x Autefa 129.95 longitudinal slitter with 9 knives, max 1800 gsm, ww: 4500 mm, yoc: 1994
01 x Autefa 161.1 winder, ww: 4500, yoc: 1994
01 x Autefa 132.94 transversal cutter, ww: 4500 mm, yoc: 1994

 

Code: 652-0003     1 x Fleissner take-up batching system (thick NW)
Add this item to your list of interesting machinesWidth: 4500 mm     YOC: 2000     EL: 380/3/50
Fully automatic slitter with 7 slitting heads
Fully automatic cross/transversal cutter
Fully automatic winding unit, max roll dia 1,5m

 

Code: 652-0004     1 x Tomes take-up batching system (thick NW)
Add this item to your list of interesting machinesWidth: 3300 mm     YOC: 1997     EL: 380/3/50
final slitting and take-up unit, with 5 slitting knives - dia 300 mm and one transversal circular knife - dia 380 mm.

 

Code: 652-0005     1 x Brosiomeccanica take-up batching system (thick NW)
Add this item to your list of interesting machines Type: BM143 / BM146     Width: 3600 mm     YOC: 2001     EL: 380/3/50
Un-winder and re-winder for nonwovens. BM143 is an unwinder to be inserted in a nonwoven line - to be fed either by woven or non-woven rolls.

 

Code: 652-0006     1 x Neuenhauser take-up batching system (thick NW)
Add this item to your list of interesting machinesWidth: 5950 mm     YOC: 1994     EL: 380/3/50
Winder for inlet or take up. Total width 6,40 meter and a motor of 0,55 kW.
Max dia of rolls 1200 mm and speed 1- 6 m/min.

 

Code: 652-0007     1 x Dilo take-up batching system (thick NW)
Add this item to your list of interesting machinesWidth: 3500 mm     YOC: 1970     EL: 380/3/50

653. Unwinders

Code: 653-0001     1 x Busch Unwinder
Add this item to your list of interesting machinesWidth: 2500 mm     YOC: 1994     EL: 380/3/50
including tensioning devices. Core size 76 mm and 152 mm.

654. pope winders

Code: 654-0002     1 x Meridiana pope winder
Add this item to your list of interesting machines Type: AR9035     Width: 4000 mm     YOC: 1998     EL: 380/3/50
max winding speed 350 m/min, max dia of finished reel 3500 mm.
Complete with winding shaft and overhead crane.

655. slitters/re-winders

Code: 655-0013     1 x Elletre slitter/re-winder
Add this item to your list of interesting machines Type: R 120A     Width: 1600 mm     YOC: 1999     EL: 380/3/50
Fully automatic slitter/rewinder designed for TNT production (tension-nip-torque) throughout the whole process. The unit consist of:
adjustable unloading table going into 2 feeding cylinders, ultra-welding unit, 14 slitting knives, minimum slitting width 62 mm.
Max ingoing width of roll 1600 mm - min ingoing width 300 mm. 3 and 6 inch cores, max dia 1600 mm and 500 kgs weight.
Speed at least 600 m/min.
The machine runs the fabric until a fault is recognized, cuts of the defect fabric, welds the good fabric together and continues to run. Start and stop-function on preset length or diameter. Automatic cutting-off and new core is inserted automatically.

 

Code: 655-0016     1 x Saltangens Mekaniska slitter/re-winder
Add this item to your list of interesting machinesWidth: 800 mm     YOC: 1988     EL: 380/3/50
Rewinder for smaller rolls designed for custom made rolls up to 100 grams and application of substrate/agent consisting of:
Take off system with airpresurized breaks, core for 76 or 150 mm, vacuum pump for substrate agent, winding drum (dia 340 mm) with 4 knives, 2 cylinders (dia 340 mm) drive to take up roll. All complete with electrical and hydraulic system in very good condition.

 

Code: 655-0021     1 x Cameron slitter/re-winder
Add this item to your list of interesting machinesWidth: 1800 mm     YOC: 1975     EL: 380/3/50
1200 mm unwind diameter and 800 mm rewind diameter, 76 mm core, with 18 knives. Minimum distance between knives 20 mm.

 

Code: 655-0024     1 x Edelmann slitter/re-winder
Add this item to your list of interesting machines Type: 640.05.24     Width: 2600 mm     YOC: 1994     EL: 380/3/50
Max fabric width 2400 mm, core size 76 mm. Winding diameter 400-1250 mm. Minimum slitting width 50 mm, including moveable take-up table. 14 knives (shear cut principle) for longitudinal slitting with pneumatically expanding undercut shaft, speed 20 - 300 m/min, complete with inlet frame with deflection rollers, operating platform, automatic web tension control with measuring roller. Automatic roll changing system with application and removal unit, support roller winding with 2 support rollers, designed for maximum winding diameters of 1,250 mm, drive of each roller through 1 independent DC motor. Winding shaft holding device with special magnet, outlet support roller with GS geared motor and 10-speed controller, roller unloading device with winding core guide arms, winding core magazine with separating device, automatic winding core feeding with pivoting transfer arms, support unit with load roller and separate drive, length measuring device with digital meter counter and electronic pre-selection.
Complete also with winding shaft pulling device and transport trolley.

 

Code: 655-0025     1 x Edelmann slitter/re-winder
Add this item to your list of interesting machines Type: 640.05.1722     Width: 3200 mm     YOC: 1990     EL: 380/3/50
two drum surface inline winder, 4 Helios scissor-type knives, shafts: 4 x 76 mm and 4 x 152 mm, max outer winding dia - 1200 mm, max speed 180 m/min, complete with: crane for shaft transport, lifting table and mobile rail, integrated core cutter, laser-device to align core to slit, Simatic multipanel for setting and control, Siemens S7 controls and inline tray for shafts.

 

Code: 655-0026     1 x Edelmann slitter/re-winder
Add this item to your list of interesting machines Type: 620.12     Width: 2500 mm     YOC: 1993     EL: 380/3/50
double turret winder including hydraulic aggregate, guide roll, dancer roll, longitudingal slitting device with 6 knives, cross-cutter, two-station turret winder, switch cabinet and control desk as well as shaft pulling unit and trolley.

 

Code: 655-0027     1 x Dusenberry slitter/re-winder
Add this item to your list of interesting machinesWidth: 1600 mm     EL: 380/3/50
Diameter rewinder max. 800 mm
Brake run pneumatic

 

Code: 655-0028     1 x Kampf slitter/re-winder
Add this item to your list of interesting machines Type: KS 106 G     Width: 1500 mm     YOC: 1972     EL: 380/3/50
Offline slitter, single winding unit.
Shaft width: 1.600 mm, 2 x 3 inch (76 mm) winding shafts,
2 x 3 inch (76 mm) unwinding shafts (152 mm and universal adaptor included), max. winding dia - 1200 mm, max. unwinding dia - 600mm, max speed 100 m/min.
21 Dienes linear cut crush knives, SPS 7 control, Kongskilde edge trim exhaust blower, Simco ionizer unit to avoid static charge, tension control and pneumatic brakes.
Complete with transport trolley for winding shafts and adapters, safety fence and light barriers.

656. core cutters

Code: 656-0001     1 x Eberlé core cutter
Add this item to your list of interesting machines Type: CO 2/240/20/4000/VE2     Width: 4000 mm     YOC: 2000     EL: 380/3/50
For cutting of cardboard cores from 500 mm to 4000 mm on 3 and 6 inch shafts.
30 mm minimum dia inside tube 36 mm min dia outside tube, 240 mm maxi dia outside tube, 1 mm min thickness of tube, 20 mm max thickness of tube, 3 mm min cut-length, 4000 mm max cut-length, 4100 mm max ingoing tube length, cut tolerance +/- 0.2 mm.
Knife: 125 mm diameter, 60 mm bore and 10 mm bevel, 2 mm thickness
Tools:
-1 steel cutting mandrel 62 HRC treated 76 mm dia (rotary blades) for cardboard tube inside dia 76.5 mm.
-1 steel cutting mandrel treated 62 HRC 152.2 mm dia (rotary blades) for cardboard tube inside diameter of 152.8 mm.

659. winding and slitting lines

Code: 659-0003     1 x Meridiana winding and slitting line
Add this item to your list of interesting machinesWidth: 3600 mm     YOC: 1997     EL: 380/3/50
Consisting of:
SV6560 surface unwinder by a 650 mm cylinder - max fabric dia 2500 mm, cylinder width 3600 mm, 25 kW motor.
RT3560 slitter/re-winder, cylinder width 3600 mm, max speed 600 m/min, operating speed normally 400 m/min, max dia of finished reel 1200 mm, 8 slitting knives - minimum cut 50 mm, 3 inch core. With two support rollers (dia 350 mm) individually driven by DC motor + 1 contact roller - dia 215 mm driven by DC motor. Also including edge trim suction unit. 50 kW installed.

 

Code: 659-0004     1 x Ahlstrom winding and slitting line
Add this item to your list of interesting machinesWidth: 2600 mm     YOC: 1990     EL: 380/3/50
For paper, laminates, nonwovens, speed 1800 m/min, shaftless unwinder working width 800 - 2850 mm, unwind roll diameter 400 - 1300 mm, for jumbo reels max dia 2300 mm, shafted Beloit cutting and re-winding unit, 10 knives, max edge trim width 150 mm, 3 reeling stations, support distance from bearing to bearing is 3100 mm, finished roll diameter max 1500 mm. Minimum slitting distance 50 mm. Core sizes 3 and 6 inch.

 

Code: 659-0005     1 x Meridiana/Celli winding and slitting line
Add this item to your list of interesting machinesWidth: 2200 mm     YOC: 1995/1998     EL: 380/3/50
consisting of:
- 01 x Meridiana SV 6560 surface unwinder, ww: 2200 mm - max dia 2000 mm, yoc: 1998
- 01 x Meridiana RT 3560 slitter/re-winder, two driven support rolls, one pressure roll with adjustable pressure, ww: 2200 mm, maximum speed 600 m/min, yoc: 1998. Max dia of finished reel 1200 mm, minimum slitting distance 50 mm, 3 and 6 inch cores, 22 knives.
- 01 x Meridiana NV 12 unloading card, ww: 2200 mm - max dia 1200 mm, yoc: 1998.
Applicable for nonwoven from 16-300 gsm.

Recycling
670. pickers

Code: 670-0003     1 x Cemid picker
Add this item to your list of interesting machinesWidth: 500 mm     YOC: 1995     EL: 380/3/50
waste cutter with feed table.

672. cutters

Code: 672-0003     1 x Laroche cutter
Add this item to your list of interesting machines Type: CR800     Width: 750 mm     YOC: 1996     EL: 380/3/50
2 cutting blades, complete with 4 meter feed-table. Newly reconditioned with new original parts from Laroche for bearings, bed-knives and flying knives. Installed power 15 kW.

 

Code: 672-0004     1 x Laroche cutter
Add this item to your list of interesting machines Type: CR800     Width: 750 mm     YOC: 1995     EL: 380/3/50
2 cutting blades, complete with 4 meter feed-table. Newly reconditioned with new original parts from Laroche for bearings, bed-knives and flying knives. Installed power 15 kW.

 

Code: 672-0005     1 x Pierret cutter
Add this item to your list of interesting machines Type: CT 60     YOC: 1991     EL: 380/3/50
Long infeed table (3000 mm) with metal detection system.
Well maintained and upgraded with new hydraulic pumps in 2015.

673. tearing machines/lines

Code: 673-0023     1 x Laroche tearing machine/line
Add this item to your list of interesting machines Type: Olympia     Width: 1000 mm     YOC: 1990/1992     EL: 380/3/50
5 cylinder tearing line with 2 cylinders from 1990 and 3 cylinders from 1992 consisting of:
? 1st cylinder – 42.000 bended pins
? 2nd cylinder – 52.000 straight pins
? 3rd cylinder – 75.000 straight pins
? 4th cylinder – 85.000 straight pins
? 5th cylinder – 108.000 straight pin
One spare cylinder is available
1 Farell bale press 100 tons and pressure of 220 bars

674. bale presses

Code: 674-0002     1 x Jovisa bale press
Add this item to your list of interesting machines Type: PV 20     YOC: 2010     EL: 380/3/50
Manual balepress for spun fiber waste from extrusion lines. Bale measurements 1200 x 700 mm. 20 ton pressure. CE-mark. Machine is hardly used, as new.

 

Code: 674-0004     1 x Gualchierani bale press
Add this item to your list of interesting machines Type: FTR/60     YOC: 1979     EL: 380/3/50
balepress including frame, filter and condensor.

679. complete recycling lines

Code: 679-0002     1 x Starlinger complete recycling line
Add this item to your list of interesting machines Type: recoSTAR universal 65 VAC     YOC: 2004     EL: 380/3/50
Versatile single shaft cutter/extruder combination for fibres, tapes and lump waste from PP, PE, PS or PA.
Consisting of:
- Conveyor belt - 5500 mm long and 750 mm wide, feeding speed 0.2 m/s, power 1.1 kW.
- Metal detector - with double layer coil for detecting all metallic materials.
- Single shaft cutter / extruder combination, 800 mm long - 400 mm shaft dia, 54 rotary knives and 4 stationary knives. Extruder screw dia - 65 mm.
- Double piston filter / screen changer with 2 screens for continuous operation.
- Water ring pelletizing unit - max capacity 200 kg/hr, 3 knives
- Drying centrifuge and cyclone.
Average capacity for spunbond PP: 60 ton/month, 2000 kg/day on average, for other materials it may be both higher and lower in capacity.
Installed power 120 kW - energy consumption 0.25 - 0.35 kWh/kg.

Other Nonwoven Equipment
681. synthetic fibre making lines

Code: 681-0001     1 x Automatik/Fleissner synthetic fibre making line
Add this item to your list of interesting machines Type: PPAS 16/1600/180     YOC: 1990-2011     EL: 380/3/50
PP staple spinning plant originally from 1990 but upgraded in several steps to current standards, spinning from 2 Deniers to 6,0 Deniers with an average capacity of 600 kg/hr consisting of:
01 x Automatik extruder type E1-180-30, screw dia 180 mm
01 x Automatik spinning station with silo for chips, extruder and 16 spinning heads - 600 mm spacing, including cleaning unit
01 x Fleissner 1st draw section type F732 (m/c nr 62) where 2 (out of 4) of the heat exchangers has been replaced 2011, width 800 mm, 7 godets - dia 220 mm (arrangement 4 over 3), speed m/min, force max 16 kN, nip roller - dia 210 mm, over godet 3.
01 Fleissner pre-heating duct - for heating of filaments from 30 deg. C to 50 deg. C., ww: 900 mm, height of tow passage 1010 mm, speed 120 m/min, operating temperature 150 deg. C.
01 x Fleissner 2nd draw section type F732 (mc/nr 68), width: 800 mm, 7 godets - dia 220 mm (arrangement 4 over 3), speed 200 m/min, force max 16 kN
01 x kiss-roll and spin-finish applicator, 800 mm, deflector roller - dia 190 mm, kiss roll - dia 100 mm
01 x Fleissner tow-stacking unit, max speed 260 m/min, horizontal swivel roll - dia 120 mm, ww: 600 mm, deflection roll - dia 190 mm, exit tension roll - dia 190 mm and 560 mm wide.
01 x Fleissner crimping section type 732 E from 2002 (replaced the original due to wear and tear), roll dia 203 mm, width 150 mm and max speed 220 m/min.
01 x Fleissner perforated tow drum dryer, drying temp 150 deg. C, heating with thermal oil, 5-section dryer, perforated drum dia 1414 mm, ww: 400 mm
01 x Fleissner cutter with tensioning unit, 200 turns/minute, with 2 cutting heads
01 x Autefa bale press type 282 complete with condensor, silo and baler max 230 bars for bales app. 350 kgs
Line is also fully complete with;
01 x Certuss steam boiler type E64 from 2008 covering steam needed for the complete unit
01 x Aura electrically heated thermal oil boiler complete with storage tank, pumps and motors to serve the complete line
02 x Nova Frigo air-conditioning unit for cool air to the complete unit type R65 from 1996/98
01 x Siemens S7 PLC upgraded 2008/09 controlling speed and pressure for the entire line
01 x set of unlisted spares that belongs to the line, for example; 01 spare new gearbox, new electrical motor and extruder head
01 heat recycling unit from A. Hering, Germany including ductwork for the installation
01 spin finish unit complete with tanks, mixing bath (heated) and distribution system each with individual motors. Originally from 2003, latest upgraded 2011.
Total installed effect is 820 kWh
Line is in extremely good condition!

 

Code: 681-0002     1 x Meccaniche Moderne/Fare synthetic fibre making line
Add this item to your list of interesting machines Type: Staple Fiber Extrusion line     YOC: 1987-2014     EL: 480/3/60
Consisting of:
-Meccaniche Moderne extruder (yoc: 1987), 160 mm 35:1 L/D, 160 mm screw - newly installed in 2014, extruder barrel newly installed in 2014, , with rotating continuous screen changer, current output roughly 860 kg/hr of PP.
-Meccaniche Moderna 8-position spin beam with godets, yoc: 1987, with individual motor/gearbox/pump and quench air fans for each position. Complete set of spin packs (with 2 spare) of 51,840 holes. Complete 2nd set of spin packs with 18,144 holes.
-Quench air cabinet for cooling of heads (with new coils)
-Faré roll stand, yoc: 1988, slow stretch, hot-oil heated, 7 rolls with 800 x 290 mm rollers.
-Faré stretch oven, yoc: 1988, steam heated (boilerand generator not included).
-Faré roll stand, yoc: 1988, fast stretch, 7 rolls with 800 x 290 mm rollers. (Currently disassembled off line)
-guiding bars for tow delivery to crimper, yoc: 1988
-Fleissner crimping unit, yoc: 1987, 195 mm rollers , completely refurbished in 2013.
-Lubricating roller with stand
-DM&E single cutting wheel unit with fan and pressure wheel. (5 wheels of different lengths included).

687. measuring, testing and inspection equipments

Code: 687-0001     1 x Intro International GmbH measuring, testing and inspection equipment
Add this item to your list of interesting machines Type: MLM3-OS Uniscan     Width: 2600 mm     YOC: 2003     
In-line traversing air permeability tester. 

689. complete lines (other)

Code: 689-0004     1 x Laroche complete line (other)
Add this item to your list of interesting machinesYOC: 2008     
Laroche Cushion & pillow filling line
- 01 x Laroche opener, saw-tooth card clothing.
- 01 x Laroche chute feed for the capacity of the cushion
- 01 x by-pass with 2 ouputs for the cushion
Supplied with all control and power cabinets.
Capacity +/- 350 pieces/hour

Complete Nonwoven Lines
690. nonwoven lines

Code: 690-0138     1 x Thibeau/Asselin nonwoven line
Add this item to your list of interesting machines Type: Complete Needling Line     Width: 4050 mm     YOC: 1980-1983     EL: 440/3/60
Consisting of;
Opening line;
01 James Hunter blending line consisting of (feeding both needlelines);
03 x 360 BFCV bale-openers, ww: 900 mm, yoc: 1973, very short infeed tables. Machines were fed by hand.
01 x 240 A bale-opener, ww: 900 mm, yoc: 1973, also with short infeed table.
01 x A19 conveyor belt
01 x Wise Industries pre-opener/mixer at the end of the conveyor
Needle-punch line;
01 Thibeau VAT 6 chutefeed
01 Thibeau 13P3 card, ww: 2200 mm, composed with
- licker-in with 1 worker/stripper
- transfer cylinder
- 1st main swift (breaker) with 3 workers/strippers
- breaker doffer
- transfer cylinder
- 2nd main swift (finisher) with 3 workers/strippers
- doffer with comb take-off
Unwinder and infeed with J-box for backing material
Asselin Model 350 crosslapper, ingoing 2200 mm, outgoing 4500 mm, speed 55 m/min
Asselin SD41 2E 06 needle-loom, ww: 4100 mm, downstroke, 2 boards, 1450 spm, 5850 n/lm, hub 40 mm.
Accumulator and winder, final outtake 4050 mm
Running speed approximately 16 m/min

 

Code: 690-0152     1 x Hergeth/Olbrich/Strahm nonwoven line
Add this item to your list of interesting machines Type: Thermobonding line     Width: 2500 mm     YOC: 1980-2012     EL: 380/3/50
Complete Thermo bonding line producing low and high density material (from 15 to 120 kg/m³)out of cotton shoddy, wool or other waste fibers. Line is especially designed for producing absorbent panel out of shoddy cotton, insulating panel out of Wool, heavy density mattresses out of manmade fibres. Switch over time from one product to another is possible without stopping the line. Line is very versatile and have test run on 50 different fibers.
Line consists of:
01 x Fallgarter bale breaker from app. 1975 with new (2010) Temafa condensor for material feeding
01 x Rolando balebreaker from app. 1985 with new (2010) Temafa condensor for material feeding
02 x Crosa Perino Blending boxes each for 750 kgs of fiber from app. 1990. the units also has individual metal separator
01 x LTG air drum filter from 2005 incl. Main ventilator (installed effect 45 kW), fiber separator, prefilter tower, fiber compactor, dust separator and exhausting silencer. All covered in a separate enclosure.
01 x HDB carding willow from app. 1975
01 x Hergeth fine opener from 1983
01 x Stummer cleaner from 2007
01 x Hergeth chutefeed system with tower
01 x Olbrich airlay card from 2010 with automatic weighing system for a production between 500 and up to 6 000 grams/sqm.
01 x Strahm thermal bonded oven type HiPer Thermo from 2008 with adjustable height up to 300 mm, gas heated.
01 x Olbrich length cutting device from 2004 with 6 knifes installed
01 x KZE guilottine cutter from 2012 for cutting up to 170 mm thickness and with measure system.
01 x Atlas Copco air compressor 4,8 KW from 2001
Totally installed effect is 320 kW. Most of the motors are frequency controlled. Can also without major changes run on 440/110 volt 60 hz.
The whole line is only run for commissioning. To keep it fit it runs minor hours every week to keep all equipment in an excellent condition.
Line will be sold including all accessories to serve needed utilization system.

 

Code: 690-0154     1 x Bematic/Texnology/Bombi nonwoven line
Add this item to your list of interesting machines Type: Complete thermobonding line     Width: 2500 mm     YOC: 2011     EL: 380/3/50
Opening and blending:
- 02 Bematic AC-1500 bale openers with electronic weigh-pans, feeding conveyor belt tensioning
- 01 Bematic AF-700 pre-opener/mixer
- 01 Bematic BLOW SM-2000 feeding tower and mixer. Two introduction rolls and one opening roll with pins.
Carding and laying:
- 01 Bematic BCV volumetric hopper feeder, ww: 2500 mm
- 01 Bematic HI 91 card, ww: 2500 mm, licker-in, pre-carding section with 4 workers/strippers, transfer cylinder, main swift with 4 workers/strippers, exit in double doffers.
- 01 Texnology Evolution crosslapper, ww: 2500/3000 mm (conveyor belt width), max input speed 90 m/min, lapping speed 120 m/min, delivery speed 20 m/min. With profiling and double sided delivery. 6 brushless motors.
Bonding and slitting/winding:
- 01 Bombi Meccanica TFP/2N/3/FB oven, 2 x Ecoflam natural gas burners, cooling section, double belt. Max temp 240 deg. C. Belt distance adjustable from 5 to 100 mm.
- 01 Bombi Meccanica TG2.9/3 slitting and guillotine cross-cutting unit. Slitter with 2 x high speed disc cutters for thick wadding and 2 x crush type cutters for thin hard felt.
Complete with all electrical cabinets, control panels, air ducts and filters.
Running polyester and bico for the furniture, wadding, insulation and automotive industries.
Production: 500 kgs/hr, from 10 - 2500 mm, 80 - 2000 gsm.

 

Code: 690-0157     1 x nonwoven line
Add this item to your list of interesting machines Type: Complete Needling Line     Width: 3200 mm     YOC: 1973-2003     EL: 380/3/50
Complete line for production of needlepunched roll goods, to be used for wadding or geotextile or other applications.
Capacity 120 kgs/hr when running 100% cotton (for shoulder pads production for example) or 360 kgs/hr when running polyester.
01 Italiana Rigenerazione "Battitrice" 1RB beater/opener, yoc: 1998, CE marked with electrical cabinet
01 Ramella card, yoc: 1979 - complete with feeder/loader, ww: 2500 mm, avantrain with 2 workers/strippers, main swift with 6 workers/strippers, doffer and randomizing cylinders (added by Bonino in 2006). Complete with electrical panel.
01 2N (Tecnica Tessile) crosslapper, yoc: 1995, ingoing 3000 and outgoing 4000 mm, frequency inverter driven, with electrical panel and control desk.
01 Automatex AG 50 T pre-needler, yoc: 1986, ww: 3300 mm, single board, downstroke, 5000 needles/lm, 1000 strokes/min + one spare needle-board.
01 Fehrer NL12RS, yoc: 1973, ww: 4400 mm, double board - upstroke, 6000 needles/lm, 1500 strokes/min + 2 spare needle-boards.
01 "end of line" winder with airpressure cylinder and 5 longitudinal slitting knives
01 complete dust suction unit, yoc: 2003 - CE marked
01 complete fiber extraction unit

691. needlepunch lines

Code: 691-0005     1 x Falubaz/FOR/Automatex needlepunch line
Add this item to your list of interesting machinesWidth: 6000 mm     YOC: 2005     EL: 380/3/50
Complete needlepunch line designed for geotextile production. 120-800 gsm, average speed 4-5 m/min.
Capacity at 6.7 dtex, 60 - 90 mm fibers, PP or PES = 600 kg/hr. Working hours: 41.000 hours consisting of:
Opening made from Falubaz
04 x bale openers with feed table (1 x 2 meters) with electronically weigh boxes, collecting conveyour with humidifier and mixing unit
01 6 chamber fiber mixing unit
01 fineopener, with metal detector prior to entry
02 dust collection units
Web formation FOR/Automatex/Asselin
01 volumetric hopper feeder type HF and Servolap for regulation of fiber feeding.
01 x WM 2+2 card, ww: 3000 mm, breast with 3 workers/strippers, main cylinder with 4 workers/strippers, exit in double doffers with special condensing system for long fibers,
01 x Automatex FA 5000/TC crosslapper with profiling
01 x Asselin ETO-15 web-drafter, 15 rolls
Bonding and finish of line
01 x Automatex EN.99/D bat feeding
01 x Automatex PR160/T pre-needler, doubleboard downstroke 8000+8000 needles/m, 55 mm stroke
01 x Automatex AG160/TB finishing needler 4-board up and downstroke 8000+8000+8000+8000 needles/m, 65 mm stroke
01 silencer room for the needle looms with measurements of 9,6m (L)x 11,8, (W)x 5,35m (H)
01 x Belmatex accumulator, capacity 30 meters
01 x Belmatex end-of-line, 4 position slitter and winding.
Average energy consumption of our production for last year was 151kW per working hour.

 

Code: 691-0011     1 x F.O.R./Autefa/Fehrer/Bombi needlepunch line
Add this item to your list of interesting machinesWidth: 4400 mm     YOC: 1972-2005     EL: 380/3/50
for any type of needlepunched material including automotive, filtration, geotex, etc.
Capacity roughly 350 kg/hr, consisting of;
- F.O.R. hopper feeder, ww: 2500 mm with CEIA type TSP metal detector
- F.O.R. Minicarda, ww: 2500 mm, breast, 1st main swift with 3 workers/strippers, transfer cylinder, 2nd main swift with 3 workers/strippers, exit in 2 doffers with comb take-off.
- Autefa Crossliner 180.97 crosslapper, ww: 2500/5000 mm
- Dilo POD pre-needler, ww: 5000 mm, single board, downstroke, 1500 needles/linear meter, including CBF.
- Fehrer NL21 needleloom, ww: 4400 mm, double board, downstroke, 10000 needles/linear meter
- CEIA type TE metal detector
- Bombi CAL.2C.44, 2-cylinder calender, ww: 4400 mm, oil heated
- PCM slitting and crosscutting group
- Falcon winder, ww: 4400 mm
Upgraded with new Siemens S7 300 PLC in 2013

 

Code: 691-0012     1 x Octir/F.O.R./Fehrer needlepunch line
Add this item to your list of interesting machinesWidth: 5300 mm     YOC: 1978-1994     EL: 380/3/50
for any type of needlepunched material including automotive, filtration, geotex, etc.
Capacity roughly 600 kg/hr, consisting of;
- F.O.R. bale opener
- F.O.R. hopper feeder, ww: 2500 mm with CEIA type TSP metal detector
- Octir card with chutefeed, ww: 2500 mm, breast, main swift with 4 workers/strippers, exit in 2 Tecnotex doffers with comb take-off.
- F.O.R. crosslapper, ww: 2500/6000 mm
- Fehrer NL21 needleloom, ww: 5300 mm, double board, downstroke, 10000 needles/linear meter
- CEIA type TE metal detector
- PCM slitting and crosscutting group, ww: 5000 mm
- Falcon winder, ww: 5000 mm

 

Code: 691-0014     1 x HDB/Asselin needlepunch line
Add this item to your list of interesting machinesWidth: 5300 mm     YOC: 1991     EL: 380/3/50
Consisting of:
-01 HDB BTT 4 feeding bin and vibrachute, ww: 3000 mm
-01 HDB Galaxy card, ww: 3000 mm
-01 Asselin 460T intermediate crosslapper, ww: 3420/3500 mm
-01 HDB Galaxy card, ww: 3000 mm
-01 Asselin 475 crosslapper, ww: 3420/6000 mm
-01 Asselin DF1500 rotary pre-needler, ww: 5300 mm, 70 mm hub, max stroke 750/min.
-01 Asselin 4E 16 DF finishing needler, ww: 5300 mm, 60 mm hub, max stroke 1350/min.
-01 end-of-line including accumulator and winder.
-01 Laroche Minitrim edgetrim, ww: 250 mm.

 

Code: 691-0015     1 x HDB/Asselin needlepunch line
Add this item to your list of interesting machinesWidth: 5300 mm     YOC: 1986/1995     EL: 380/3/50
Consisting of:
- HDB type BTT 4 vibration feeder with silo, ww: 3000 mm
- HDB Galaxy card, ww: 3000 mm
- HDB intermediate crosslapper, ingoing 3000 mm and outgoing 3000 mm
- HDB Galaxy card, ww: 3000 mm
- Asselin Profile 030 serie 678 crosslapper, ingoing 3000 mm and outgoing 6500 mm
- Asselin SD 65.1M pre-needler, downstroke, with DCIN in-feed, ww: 6500 mm
- Asselin DF finishing needler, ww: 5350, max stroke 1335 per minute, stroke 60 mm, 2 x 4200 needles/lm. Originally 4 boards - up and down, but now working as a 2-board upstroke loom only because the downstroke modules have been removed.
- Asselin accumulator, ww: 5200 mm
- Asselin winder, ww: 5300 mm
- Laroche edge-trim shredder
Capacity: 600 kg/hr with 100% PET fiber

 

Code: 691-0016     1 x needlepunch line
Add this item to your list of interesting machinesWidth: 4200 mm     YOC: 1978 - 2013     EL: 380/3/50
for any type of needlepunched material including automotive, filtration, geotex, etc.
Capacity roughly 600 kg/hr, consisting of;
- F.O.R. bale opener
- F.O.R. hopper feeder, ww: 2500 mm with CEIA type TSP metal detector
- Octir card with chutefeed, ww: 2500 mm, breast, main swift with 4 workers/strippers, exit in 2 Tecnotex doffers.
- Autefa Crossliner 180.97 crosslapper, ww: 2500/5000 mm
- Dilo POD pre-needler, ww: 5000 mm, single board, downstroke, 1500 needles/linear meter, including CBF.
- Fehrer NL21 needleloom, ww: 4400 mm, double board, downstroke, 10000 needles/linear meter
- Fehrer NL21/R needleloom, ww: 5300 mm, double board, upstroke, 10000 needles/linear meter
- CEIA type TE metal detector
- Bombi CAL.2C.44, 2-cylinder calender, ww: 4400 mm, oil heated
- PCM slitting and crosscutting group
- Falcon winder, ww: 4400 mm
Upgraded with new Siemens S7 300 PLC in 2013

 

Code: 691-0017     1 x needlepunch line
Add this item to your list of interesting machinesWidth: 2500 mm     YOC: 1972-2002     EL: 380/3/50
consisting of:
- F.O.R. hopper feeder, ww: 2500 mm with CEIA type TSP metal detector
- F.O.R. Minicarda, ww: 2500 mm, breast, 1st main swift with 3 workers/strippers, transfer cylinder, 2nd main swift with 3 workers/strippers, exit in 2 doffers with comb take-off.
- MTV cross lapper, inlet: 2500 mm, outlet: 3200 mm, yoc: 1985
- 01 Fehrer NL28 pre-needler, ww: 2500 mm, yoc: 1971, with CBF infeed, single board - downstroke, 60 mm hub, 650 strokes/min, 1000 needles/lm
- 01 Dilo OD-II 25 finishing needle loom, ww: 2500 mm, yoc: 1982, double board, downstroke, 30 mm hub, 1200 strokes/min, 6000 needles/lm
- 01 Dilo end of line, ww: 3500 mm, yoc: 1970, winder with cut-off knife.
Please note that line can be offered with additional needle-looms as well as calender or different end-of-line system.

 

Code: 691-0019     1 x Hergeth/Fehrer needlepunch line
Add this item to your list of interesting machinesWidth: 4000 mm     YOC: 1986-2015     EL: 380/3/50
for automotive interiors, artificial leather, filtration and industrial nonwoven products, consisting of:
Opening & mixing
01 x Dajin Tech bale-opener ww; 1000 mm, yoc: 2015, with electronic weighing
02 x Hergeth Hollingsworth bale-openers, ww: 1000 mm, yoc: 1986, with electronic weighing from 2013
01 x take-up conveyor feeding into;
01 x Hergeth Hollingsworth MZ
01 x Hergeth Hollingsworth 6.110, 10-fold mixer, yoc: 1993
01 x Hergeth Hollingsworth FS5 6.220 box, yoc: 1993
01 x Hergeth Hollingsworth MTO 6.056 fine-opener, yoc: 1993
01 x Hergeth Hollingsworth FS5 6.220 box, yoc: 1993
Carding and web forming:
01 x Hergeth Hollingsworth 6.130 Master Chute, ww: 3000 mm, yoc: 1993
01 x Boekels EFD 110 x 310 weighing bridge, yoc: 1994
01 x Hergeth Hollingsworth 6.345 card, ww: 3000 mm, breast, main swift with 4 workers/strippers and double doffers, yoc: 1993
01 x Hergeth Hollingsworth 6.435 crosslapper, ww: 3000/4500 mm, yoc: 1993
01 x Hergeth Hollingsworth 6.455 drafter, 8 over 8 cylinders, yoc: 1993
Bonding and end-of-line:
01 x Fehrer NL9/S, ww: 4400 mm, single board, downstroke, with CBF, yoc: 1993
03 x Fehrer NL21, ww: 4000 mm, double board, downstroke, yoc: 1993
01 x Hyun Il calender, 2 cylinders, electrically heated, ww: 2400 mm, yoc. 2015
01 x Dajin Tech slitter/winder, ww: 4000 mm, 5 knives, yoc: 2015

 

Code: 691-0020     1 x Asselin needlepunch line
Add this item to your list of interesting machines Type: Laboratory line     Width: 500 mm     YOC: 1976     EL: 380/3/50
Consisting of:
01 x carding willow
01 x hopper feeder
01 x card, main cylinder with 4 workers/strippers and single doffer, ww: 350 mm
01 x crosslapper, 350/500 mm
01 x needle loom, single board, downstroke, 75-300 strokes/min, 60 mm stroke height, needle depth 275 mm, total number of needles 1925 (=3850 per linear meter). Discontinuous feed: adjustable from 2 to 20 mm / stroke.
01 x winder
Complete with control panel. All in very good condition.

692. thermobond lines

Code: 692-0001     1 x thermobond line
Add this item to your list of interesting machinesWidth: 2500 mm     YOC: 1996     EL: 380/3/50
Complete thermobonding wadding line for recycled or virgin fibers with bico.
Consisting of:
02 OMMI bale-openers
01 Dell'Orco & Villani blending box (4 x 8 x 3.5)
01 Dell'Orco & Villani BM2500 shaker/blender, yoc: 1996
01 Bematic double doffer card, ww: 3000 mm, yoc: 1990, with volumetric hopper feed.
01 Automatex FA 850, yoc: 1996
01 Sicam thermobonding oven with 2 conveyor belts, ww: 2500 mm x 3800 mm (length)
01 Automatex longitudinal and transversal cutter (guillotine) with winding, yoc: 1996
Production: 600 kg/hr (polyester) - other fibers 800 kg/hr.
Still running.

 

Code: 692-0006     1 x thermobond line
Add this item to your list of interesting machines Type: airthrough bonding line     Width: 1200 mm     YOC: 1985-2015     
consisting of:
01 x Kyowa bale-opener
01 x Kumkang E.R.M. fine-opener
02 x Kyowa cards, ww: 1500 mm (60 inch)
01 x single pass oven with boiler
02 x 2-cylinder calender, heating by hot-oil.
01 x slitter and turret winder
Running on PP-PE, PET-PE and bico, for production of ADL (acquisition distribution layer) as well as top-sheet and filter materials (water purification filters). Capacity roughly 110 kg/hr - 20 gsm@1200 mm@75 m/min.

694. random airlay lines

Code: 694-0005     1 x Trützschler/Lessco/Automatex random airlay line
Add this item to your list of interesting machinesWidth: 2500 mm     YOC: 1999/2005     EL: 480/3/60
consisting of:
Trützschler airlay webformer, yoc: 2005, ww: 2000 mm
02 x Lessco single belt ovens for low melt bico, gas heated (one working – one not)
01 x cold calender, chilled by water (chiller not included)
01 Automatex needle loom, ww: 2000 mm, 2 boards
01 end-of-line
typical weights, 1.75 – 7 ounce/sqy (60 – 240 gsm)
raw material = recycled fibers and carpet fibers
mainly used in automotive industry

 

Code: 694-0006     1 x random airlay line
Add this item to your list of interesting machinesWidth: 2300 mm     YOC: 1982     EL: 380/3/50
500 kg/hr, for 150 - 1500 gsm, speed 1-10 m/min. Suitable for all types of fibers such as coconut, sisal, jute, wool, acrylic, cotton and synthetics. Consisting of:
- 01 Llorpic bale-opener + tearing cylinder, ww: 1400 mm
- 01 Fehrer K12 airlay card unit, ww: 2300 mm
- 01 Asselin 169 rotary pre-needler, ww: 2800 mm, 960 needles/lm
- 01 Fehrer NL21 needle loom, ww: 2400 mm, 4500 needles/lm
- 01 end-of-line cutting/slitting/winding
Upgraded electrical cabinets in 2003 - all with Siemens PLC and frequency inverters.

696. spunlace lines

Code: 696-0002     1 x Spinnbau/Fehrer/Fleissner/Bastian spunlace line
Add this item to your list of interesting machines Type: Aquajet     Width: 2400 mm     YOC: 1999     EL: 380/3/50
Average production 240 gsm with average speed of 30 m/min. Material used is 100% comber cotton noils, consisting of:
02 feeding towers to the cards chutefeeds
01 Spinnbau Turbounit card (aerodynamic) with integrated chutefeed, having produced 350 kg/hr giving 60 - 270 gsm
01 Fehrer V21/K12 card (aerodynamic) with integrated chutefeed, having prodcued 450 kg/hr giving 100 - 270 gsm
01 collecting belt for the 2 layers of web
01 Fleissner Aquajet hydro-entanglement unit with pre-wetting, one bar for each fabric side
01 Fleissner drum dryer with 6 drums - dia 1414 mm, gasheated with 1 Weishaupt burner per 2 sections with a capacity of 800 kg/hr with residual humidity to 130% and at exit of dryer 4% at a temperature of 180 degrees C.
01 Protagon on-line measuring device of residual humidity, thickness and web-weight.
01 Bastian winder
01 central line control panel from 2011.
01 watercleaning system based on beltfilter type
01 complete vacuum system for water distribution using 8 m3 of fresh water/hr

697. spunbond/meltblown lines

Code: 697-0007     1 x Second Light Industrial machinery spunbond/meltblown line
Add this item to your list of interesting machines Type: Complete Spunbond line     Width: 2400 mm     YOC: 2008     EL: 380/3/50
for production of PP spunbond ranging from 10 gsm to 200 gsm
Production capacity: 4000 Tonnes/Year (40gsm)
Raw material: polypropylene 20-40 MFI
Consisting of;
02 Spinning beams
02 drawing systems
01 web forming equipment
01 Calander with two rollers and oil heating system
01 winder
Completely upgraded with European parts and control systems, fully integrated to CE standards with regards to safety and fully enhanced with electrical and mechanical upgrades.

 

Code: 697-0008     1 x STP Impianti spunbond/meltblown line
Add this item to your list of interesting machines Type: NW 70     Width: 2500 mm     YOC: 2014     EL: 380/3/50
with 3 beams for SMS production running max. 400 m/min producing from 9 - 120 gsm with an average capacity of 400 - 750 kg/hr, consisting of:
01 Piovan gravimetric dosing unit for 3 batches
01 PP extruder with a capacity of 800 kg/hr
01 PP co-extruder for a capacity of 100 kg/hr
01 Melt blown extruder for a capacity of 250 kg/hr
02 S-beams type 4
01 Kazen melt blow beam (1 spare is available)
01 Andritz Kuester calander type Nexcal 412.22 with 1 steel roll and 1 Hot S-roll
02 Atlas Copco Compressor type ZS 110 (one for S and one for M)
01 Celli winder
01 Isra vision web inspection system
01 oven for spinnerets
01 Ultrasonic cleaning unit